Click here for the AUSTEST test report
POWERMAX™: Gigabit High Speed Ethernet

DINTEK PowerMAX™ Category 6 Patch Cords are specifically designed to support high speed data networks for 1000mb applications, and are fully tested to meet TIA/EIA Category 6 channel requirements.

The patch cables are made from high quality shielded 4 pair 24AWG stranded wire.

DINTEK PowerMAX™ Category 6 Patch Cords are pre-terminated with RJ45 plugs and feature anti-snag strain relief boots. DINTEK recommends the entire range of PowerMAX™ UTP products be used in a end-to-end system to maximize cabling performance.

Standards & Applications


  • Patch panel to patch panel connections
  • PC to information outlet connections
  • Information outlet to telecommunications closet connections
  • Equipment & DTE connections


  • UL Verified
  • ISO/IEC11801 2nd edition
  • ANSI/TIA Standard 568-C.2
  • CENELEC EN 50173


  • Molded boots prevent pin from bending and cables from kinking
  • 24AWG stranded wire provides maximum flexibility
  • Brilliant colors make management a snap
  • Fully tested to meet ANSI/TIA-568-C.2 category 6 requirement
  • The various colors are available to meet TIA/EIA-606 standards
  • The mechanical characteristics and transmission performance meet 16Mbps token Ring,10Base-T,100Base-T,155Mbps,622Mbps ATM,Giga- bit-Ethernet and 1.2Gbps ATM requirements.

Physical Characteristics

  • Twisted pair color code:
    • Pair 1> blue, white/blue ring
    • Pair 2> orange, white/orange ring
    • Pair 3> green, white/green ring
    • Pair 4> brown, white/brown ring
  • Conductor: 24AWG (7×0.195mm) stranded anneal copper wire
  • Insulation material: HDPE
  • Diameter of dielectric core: 1.0±0.05mm
  • Insulation thickness: min at any point: 0.20mm
  • Number of twist pairs: 4 pairs
  • Assembly: 4 pairs of dielectric core shall be stranded in circular form
  • Material of jacket: PVC/LSZH
  • Thickness of jacket: AVG 0.66~0.70mm
  • Nominal O.D: 5.6±0.2mm
  • Jacket color: red, orange, yellow, green, blue, grey, etc
  • RJ45 plug:Housing>polycarbonate
  • Contact>copper alloy 50u” gold plated over nickel
  • Strength>20lbs. min
  • Durability>200 cycles min.
  • Insulation resistance: 500 megaohms min. Molded boots prevent pin from bending and cables from kink.
  • Wiring schemes: T568A