2m Cat 6A 4 Pair F/UTP LSZH Patch Cord – Blue

Product Code: 1201-06062A

2m Cat 6A 4 Pair F/UTP LSZH Patch Cord – Blue2018-09-03T17:22:57+00:00
Description

POWERMAX+™ : Cat 6A 10 Gigabit High Speed Ethernet

Cat 6A 4 Pair F/UTP Patch Cord LSZH

DINTEK PowerMAX+™ Foil Wrapped UTP Patch Cords, are key components of the PowerMAX+™ F/UTP end-to-end solution.

DINTEK PowerMAX+™ F/UTP Patch Cords are specifically designed to support high speed data networks for 10-Gigabit Ethernet applications, and are fully tested to meet ANSI/TIA-568.2-D Category 6A channel requirements. The patch cables are made from high quality shielded 4 pair 26AWG stranded wire.

DINTEK PowerMAX+™ patch cords are pre-terminated with RJ45 shielded plugs and feature anti-snag strain relief boots. DINTEK recommends the entire range of PowerMAX+™ Shielded products be used in a end-to-end system to maximize cabling performance.

  • 26AWG stranded wire provides maximum flexibility.
  • Brilliant colors make management a snap
  • Fully tested to meet ANSI/TIA-568.2-D category 6A channel requirement.
  • The various colors are available to meet TIA/EIA-606 standards.
  • The mechanical characteristics and transmission performance meet 16Mbps Token Ring, 10Base-T, 100Base-T, 155Mbps, 622Mbps ATM, Gigabit-Ethernet, 1.2Gbps ATM and 10G Ethernet requirements.
Standards & Applications

Applications

  • 10GBASE-T Ethernet
  • 100BASE-TX Fast Ethernet
  • 1000BASE-TX Gigabit Ethernet
  • 1000BASE-T Gigabit Ethernet
  • 10BASE-TX Ethernet
  • ATM CB1G
  • 155/622 Mbps ATM
  • 100 Mbps TP-PMD
  • 100VG-AnyLAN
  • 4/16 Mbps Token Ring
  • Voice

Standards

  • UL Listed
  • Meet Cat 6A channel performance requirements in ANSI/TIA-568.2-D
  • CENELEC EN 50173-1, CENELEC EN 50288-10-1 for horizontal cable
  • ISO/IEC 2nd Edition 11801 Class EA
Features & Specifications

Features

  • Molded boots prevent pin from bending and cables from kinking
  • Stranded wire provides maximum flexibility
  • Fully tested to meet ANSI/TIA-568.2-D category 6A requirement
  • The mechanical characteristics and transmission performance meet 10G baseT Ethernet, 16Mbps token Ring, 10Base-T, 100Base-T, 155Mbps, 622Mbps ATM, Gigabit-Ethernet and 1.2Gbps ATM requirements.

Electrical Characteristics

  • Impedance: 100 15 ohm
  • Capacitance unbalance pair to ground: max. 330pf/100m Max.
  • D.C.R(Max.): nom. 14.8 ohm/100m at 20℃
  • DC Insulation Resistance (Min.): 1500MΩ/100m min.
  • Resistance unbalance(Max.): 3% Max./100m

Environmental Conditions

  • Twisted pair color code:
    • Pair 1> blue, white/blue ring
    • Pair 2> orange, white/orange ring
    • Pair 3> green, white/green ring
    • Pair 4> brown, white/brown ring
  • Conductor: 26AWG Stranded anneal copper wire
  • Insulation material: Polyolefin
  • Insulation Diameter: 0.96±0.05mm
  • Diameter of dielectric core:  P1&P3: 0.94±0.005mm   |   P2&P4: 0.92±0.005mm
  • Number of twist pairs: 4 pairs
  • Material of jacket: LSZH
  • Jacket outside diameter:. 6.0±0.15mm
  • Shielding Material: Aluminum Mylar(Aluminum inward)
  • Shield Coverage: 100% coverage with 25% overlapping
  • Drain Wire: 26AWG Tinned Copper
  • Shielded RJ45 plug
  • Contact:copper alloy 50u” gold plated over nickel
  • Strength:20lbs. min
  • Durability: 750 cycles min.
  • Insulation resistance: 500 MΩ min.
  • Assembly boots prevent cables from kink.
  • Wiring schemes: T568A wiring.
  • Color: Blue