ezi-Fibre Quick Assembly LC Connectors: Aqua

Product Code: 2106-02018

///ezi-Fibre Quick Assembly LC Connectors: Aqua
ezi-Fibre Quick Assembly LC Connectors: Aqua2018-06-27T12:23:23+00:00
Description

DINTEK’s ezi-FIBRE™ Mechanical LC Connectors provide an inexpensive, & efficient toolless alternative to terminating fibres without the need for a fusion splicer.

DINTEK’s ezi-FIBRE™ LC Connectors use V-groove technology, to align the fibres together and maintain physical contact between the fibres. No assembly tool is required to ensure the fibres are mated correctly. The resulting connection using the connector results in an average insertion loss of about 0.1dB.

Features & Specifications

Applications

  • FTTx
  • Pigtail connection in premise environments
  • (FTTx) applications
  • Telecommunications
  • CATV
  • Local area network

Benefits

  • Minimal tools required
  • Fast splicing time
  • For 250 µm and/or 900 µm buffered fibres
  • Uses V-Groove alignment technology
  • 30 Second Termination Time
  • Connectors Are Re-usable
  • Insertion loss of approx 0.1dB
  • Can be joined to make duplex, triplex etc.
Termination Process

(1) Remove Dust Cap and clean Ferrule. Connect QLC with fibre VFL to verify connections.

(2) Slide on correct boot, and screw cover. Prepare fibre as below. Strip, clean & cleave fibre precisely.

(3) Take off Release Key & Turn on the VFL checker light.

(4) Remove Dust Cap and clean Ferrule. Connect QLC with fibre VFL to verify connections.

(5) Slide on correct boot, and screw cover. Prepare fibre as below. Strip, clean & cleave fibre precisely.

(6) Take off Release Key & Turn on the VFL checker light.

How to re-use the connector

  • Insert Release Key back to release the metal Button, then remove fibre.

Terminating a 3.0mm Cable 

  • Insert fibre as shown above. Cut strength member after locking boot.

Making It Duplex and Triplex  

  • Clamp connectors side by side to create multi configurations.
Document Downloads