Product Code:
2106-02014
2106-02015
2106-02016
2106-02017
2106-02018
2106-02019
ezi-Fibre Quick Assembly LC Connectors
ezi-Fibre™ Mechanical LC Connectors provide an inexpensive, & efficient toolless alternative to terminating fibres without the need for a fusion splicer.
ezi-Fibre™ LC Connectors use V-groove technology, to align the fibres together and maintain physical contact between the fibres. No assembly tool is required to ensure the fibres are mated correctly. The resulting connection using the connector results in an average insertion loss of about 0.1dB.
Applications
- FTTx
- Pigtail connection in premise environments
- Fibre-to-the-Subscriber (FTTx) applications
- Telecommunications
- CATV
- Local area network
Standards
- ISO/IEC 11801
- Cenelec EN 50173-1 / TIA-568 C.0
- Data Center Cenelec EN 50173-5
- ISO/IEC 24764/ TIA-942
- Ethernet IEEE 802.3; 10/40/100GbE
Features
- Minimal tools required
- Low insertion loss of between 0.1-0.2db
- Environmentally stable
- Easy termination / Fast splicing time
- Suitable for 250 μm and/or 900 μm buffered fibers
- Uses V-Groove alignment technology
Benefits
- Fast splicing time
- Uses V-Groove alignment technology
- Connectors Are Re-usable
- Can be joined to make duplex, triplex etc.
ezi-FIBRE LC Connectors
The ezi-Fibre LC connector range comes in various options including OM1, OM2, OM3, OM4 and OS2
Fibre Accommodations
250um / 900um / 2.0mm / 3.0 mm
| Ordering Information | ||||
|---|---|---|---|---|
| Product Number | Product Name | Connector Type | Color Marking | Mode |
| 2106-02014 | ezi-Fibre LC/UPC SM Quick Assembly Connector | LC | Blue | Single Mode |
| 2106-02015 | ezi-Fibre LC/APC SM Quick Assembly Connector | LC | Green | Single Mode |
| 2106-02016 | ezi-Fibre LC MM Quick Assembly Connector (50/125) | LC | Beige | Multi Mode |
| 2106-02017 | ezi-Fibre LC MM Quick Assembly Connector (62.5/125) | LC | Beige | Multi Mode |
| 2106-02018 | ezi-Fibre LC MM Quick Assembly Connector (10G/OM3) | LC | Aqua | Multi Mode |
| 2106-02019 | ezi-Fibre LC MM Quick Assembly Connector (OM4) | LC | Aqua | Multi Mode |
Technical Specifications
| General Specifications | |
|---|---|
| Cable Size | 250um / 900um / 2.0mm / 3.0 mm |
| Assembly Time | 30 seconds (after preparing fibre ends) |
| Materials | Engineering Plastics & Index matching gel |
| Mechanical Data | |
|---|---|
| Pull Strength (kg), Typical | 0.5kgf (900um); 6kgf (3.0mm) |
| Operating Temperature (deg) | -40 ~ +80°C |
| Connector Length | 41mm |
| Performance Data | |
|---|---|
| Insertion Loss (dB), Typical | 0.1dB Insertion Loss (dB) |
| Insertion Loss (dB), Maximum | Max 0.2dB |
| Return Loss (dB), Typical | -50 ~ -55dB |
Termination Process
Remove Dust Cap and clean Ferrule. Connect QLC with fibre VFL to verify connections.
Slide on correct boot, and screw cover. Prepare fibre as below. Strip and clean it. Cleave fibre precisely.
Take off Release Key & Turn on the checker.
Insert fibre to LC Connector until it touches the fibre inside.
Form a small curve. Then, press metal Button to connect fibres. You will see no leakage of red light for a low loss
Lock Boot and Wear Dust Cap. Now the connection is complete.
How to re-use Connector | Insert the connector Insert release key. Press down to release the metal Button.
How to connect a 3.0mm cable. | Insert fibre as shown above. Cut strength member after locking Boot.
To make as duplex, Triplex & Quadruplex, clamp connectors side by side to create multi configurations.